Base - Gigaset E290 Manual

Getting started

Base

Connecting the base to power supply and telephone network
¤
Connecting the phone jack
¤
Connect the power adapter
2
The power adapter must always be connected as the phone does
not work without a power supply.
Connecting the base to the router
You can also operate the telephone on the analogue connection of a router.
¤
Connect the phone jack
router .
2
Any echoes can be reduced by enabling XES Mode ( p. 38).
12
.
1
and insert the cables into the cable ducts.
2
and connect it to the analogue port of a
1
1
1
2