Adjustment Instructions; Tilt Adjustment; Operating Instructions - Bionaire BSF1731 Instruction Leaflet

Oscillating stand fan remote control stand fan

Hide thumbs

Table Of Contents

Table of Contents

OPERATING INSTRUCTIONS

FOR REMOTE VERSION

Step 1: Insert 2 AAA batteries into the back of the remote control.

Remote Control: Your remote control requires 2 AAA batteries for operation.

To install the batteries, simply depress the back of the remote with your

thumb on the spot marked OPEN. Insert batteries according to the diagram

shown inside. Replace cover.

Step 2: Set the fan base on a dry level surface.

Step 3: Plug cord into any standard 120V AC outlet.

Step 4: To turn the fan on press the POWER button on the remote control

or on the touch-key pad.

Step 5: The speed is adjustable by pushing either the speed button on the

remote control, or on the SPEED button on the touch-key pad. Push this

button first for LOW, again for MEDIUM, and a third time for HIGH. Push a

fourth time to repeat the sequence. To turn the fan OFF, push the OFF

button on the remote control, or on the touch-key pad.

Step 6: To oscillate the fan head, push the button marked OSCILLATE on

the remote, or OSCILLATE on the touch-key pad. Push a second time to

stop oscillation.

Step 7: This fan is equipped with a 4-setting timer. (1hr, 2hr, 4 hr, 8hr). To

activate the timer, push the TIMER button on the remote control, or the

TIMER button on the touch-key pad. Continue to push the TIMER button

to cycle through your setting options. Push the button twice to repeat the

sequence.

Step 8: For a natural breeze movement, push the button marked MODE

on the remote control or the touch-key pad. This BREEZE mode will imi-

tate wind gust by varying the fan speeds between fast and slow. By

pressing the MODE button a second time, you activate the SLEEP setting.

This function slows the fan speed down, and when used in conjunction

with the timer settings, will ultimately turn the fan off. Press the Mode

button a 3rd time for BREEZE and SLEEP combined.

NOTE: Timer can be used in conjunction with several other functions. For

example: Sleep + 4hr. TIMER causes the fan to gradually slow down over

4 hours and eventually turn off.

OPERATING INSTRUCTIONS

FOR NON-REMOTE VERSION

Step 1: Set the fan base on a dry, level surface.

Step 2: Please make sure the Speed Control Knob is in the "Off" position. Plug

the cord into any standard 120 V A/C outlet.

Step 3: The SPEED is adjusted by moving the knob left or right to the

desired setting.

Step 4: The OSCILLATION Knob is located on the top of the fan motor hous-

ing. To start oscillation, push knob down. To stop oscillation, pull knob up.