Assembly Instructions - Bionaire BSF1731 Instruction Leaflet

PLEASE READ AND SAVE THESE
IMPORTANT SAFEGUARDS.
THIS PRODUCT IS EQUIPPED WITH A POLARIZED AC (Alternating Current) PLUG (a plug
having one blade wider than the other). This plug will fit into the power outlet only one
way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact qualified personnel to install the proper outlet.

ASSEMBLY INSTRUCTIONS

A
B
Figure 1
BSF1731
A. Grill Hub
B. Front Grill
C. Fan Blade Nut
D. Fan Blade
E. Rear Grill
Mounting-Ring
F. Rear Grill
G. Motor Shaft
H. Motor Housing
I. Upper Pole
J. Height Adjustment Knob
K. Lower Pole
L. Base Insert
M. Base
N. Weighted Insert
O. Weight Nut
P. Fixed Screw
Q. Grill Ring
R. Remote Control Housing
S. Fan Post Screw
T. Remote Control
BASE/POLE ASSEMBLY
Step 1: Insert lower pole into the base until the threaded end of the pole
protudes through the opening in the center of the base. Twist the pole
clockwise until locked.
Step 2: Turn the base upside down and place the weighted insert into
the base by aligning it between the two parallel ribs. Secure the base,
weight, and pole system together by tightening the weight nut to the
threaded portion of the pole. Place the base on the floor, right side up.
Step 3:Replace the height adjustment knob over the pole, slide it down
the pole, and secure it to the base by turning clockwise.
DO NOT DEFEAT THE SAFETY PURPOSE OF THIS POLARIZED PLUG IN ANY WAY.
C
E
D
F
L
P
BSF 1731 9/00
G
R
I
Figure 2
BSF1731RC
H
G
I
J
Q
K
O
H
T
S
J
K
M
N
2