Advertisement
F E AT U R E S - O P E R AT I O N S
ASSEMBLY INSTRUCTIONS
Your Table Fan comes completely assembled and is ready
for immediate use. Carefully unpack your fan, read the
instructions completely, plug it in and enjoy!
OPERATING INSTRUCTIONS
1. Set the fan base on a dry, level surface.
2. Plug cord into any standard 120 volt AC outlet.
Please make sure the Speed Control Switch is in the
OFF (0) position. The Speed Control Switch is located
on the Base.
Figure 1
A. Front Grill
B. Logo Plate
C. Fan Blade
D. Base
E. Carry Handle
3. The speed is adjustable by turning the Speed Control
Switch to the desired setting, 0-1-2-3.
4. The OSCILLATION control knob (
the top of the fan motor housing. To start oscillation,
push control knob down. To stop oscillation, pull
control knob up.
ADJUSTMENT INSTRUCTIONS
Tilt Adjustment:
Loosen the tilt-adjustment knob and move the fan head
to the desired angle. Once your fan is at the appropriate
angle, tighten the knob by turning clockwise.
A
G
B
C
D
H
F. Rear Grill
G. Oscillation Control Knob
H. Speed Control Switch
I. Tilt Adjustment Knob
E
F
I
) is located on
Advertisement
