Ideal material characteristics
● low cohesion (flows well through chutes, similar to a liquid)
● low adhesion (does not stick to surfaces)
● low abrasion (will not wear out chutes, flowguide, or sensing plate)
● low causticity (will not damage internal flowmeter components)
Location
Materials with low moisture content generally have excellent flow and adhesion characteristics.
In processes where material moisture content varies, select a flowmeter location where the
moisture content is lowest.
Linings
● Sensing plate abrasion resistant linings are often used for aggregates, barley, corn,
soybeans, wheat, and material with similar hardness and particle mass. Abrasive materials
are best monitored at low velocity.
SITRANS WF100
Operating Instructions, 02/2012, 7ML19985NB01-01
Description
13