Inserting The Batteries In The Headphones - Sony MDR-DS8000 Operating Instructions Manual

Inserting the batteries in the headphones

As shown in the illustration below, insert two fully-charged (page 9) rechargeable
nickel-metal hydride batteries with the 3 and # ends in the correct direction, and
insert the # side first.
When using optional batteries
You can also use R6 (size AA) alkaline batteries. Insert the batteries as shown above.
Usage times for dry-cell batteries
Battery type
Sony alkaline battery LR6 (SG)
*
Usage time stated above may vary according to the temperature or conditions of use.
Note
Manganese batteries cannot be used with this unit.
How to reattach the battery cover should it come off
As shown in the illustration, align A with A, and B with B, reattach, and then slide
the cover in place.
16 GB
Connection
1
Usage time
Approx. 7 hours
2
*
3