Plugging Into The Wall Outlet - Sony MDR-DS8000 Operating Instructions Manual

Setting the input level
If the volume is low using analogue input, set the ATT (attenuator) switch to "0dB".
Setting
0dB
–8dB
Notes
• Be sure to lower the volume before setting the ATT switch.
• If audio input to the LINE INPUT jacks is distorted (sometimes, noise can be heard at the same
time.), set the ATT switch to "–8dB".

Plugging into the wall outlet

Processor
To DC IN jack
Notes
• Be sure to use the supplied AC power adaptor. Using AC adaptors with different plug polarity
or other characteristics can cause product failure.
• Be sure to always use the supplied AC power adaptor. Even AC power adaptors having the
same voltage and plug polarity can damage this product due to the current capacity or other
factors.
ATT
Connected components
TV, portable components, and other components with a low output level
Other components (initial settings)
Unified polarity plug
0dB
–8dB
AC power
adaptor
To the wall outlet
Connection
15 GB