TP48200A-DT19C1, TP48200A-DT19C2,
TP48200A-HT19C1, TP48200A-HT19C2 Outdoor
Power System
User Manual
Procedure
Step 1 Connect the ground cable to the ESD wrist strap, and put on the ESD wrist strap and ESD
gloves.
Step 2 Remove the battery temperature sensor cable from the UIM, as shown in
Figure 4-28 Removing the battery temperature sensor cable
Step 3 Cut off the cable tie of the battery temperature sensor and remove the sensor.
The detection probe must not contact a metal surface.
Issue 02 (2019-02-26)
The new battery temperature sensor is intact.
Copyright © Huawei Technologies Co., Ltd.
4 Maintenance
Figure
4-28.
83