Huawei TP48200A-DT19C1 User Manual page 88

TP48200A-DT19C1, TP48200A-DT19C2,
TP48200A-HT19C1, TP48200A-HT19C2 Outdoor
Power System
User Manual
Figure 4-25 Removing the temperature and humidity sensor cable
Step 3 Remove the temperature and humidity sensor, as shown in
1. Hold down the button on the sensor and remove the sensor cover.
2. Unscrew the sensor base.
3. Record the positions where cables connect to the base and remove the cables.
Figure 4-26 Removing the ambient temperature and humidity sensor
Step 4 Install a new ambient temperature and humidity sensor.
1. Reconnect the removed cables to the new sensor base based on the recorded information.
2. Tighten the screws and secure the sensor base onto the cabinet.
3. Properly place the sensor and secure it to the base.
Issue 02 (2019-02-26) Copyright © Huawei Technologies Co., Ltd.
4 Maintenance
Figure 4-26.
80