CYBEX 625T Owner's Manual page 25

2. Unthread the nut at the end of the A/V cable.
3. Insert the A/V cable into the D-shaped hole in the mounting plate on the front of the unit.
4. Thread the nut removed in step 2 onto the A/V cable by hand.
5. Install the A/V cable to the mounting plate on the front of the unit using a 14 mm open end wrench.
6. Plug the CSAFE cable into the CSAFE coupler on the front of the unit.
Install shield
Tighten the seven screws securing the shield to the base using a Philips screwdriver.
Cybex 625T Treadmill Part Number LT-23221-4 H
Page 25 of 88
Description
1 A/V cable
2 Nut
Description
1 A/V cable hole
2 CSAFE coupler
3 Nut
4 Mounting plate
5 A/V cable
6 CSAFE cable, Red
Description
1 Base
2 Screws
3 Shield
Qty.
1
1
Qty.
1
1
1
1
1
1
Qty.
1
7
1