Water Quality Maintenance Start-Up - Master Spas LEGEND XTREME SERIES Owner's Manual

WA TEil QUALITY MAINTENANCE ST All T-UP
FOR. ECO PUR. ™ WATER. PUR.IFICA TION SYSTEM
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Fill spa using ECO PUR™ Charcoal Pre-filter.
During initial filling of the spa with fresh water, add a
sequestering agent such as Mineral Clear or Stain and Scale,
etc. depending on the brand name. Allow
to circulate and filter for 24 hours , if practical.
Test water for pH, total Alkalinity, and Calcium hardness.
The pH should be 7.2 - 7.8 and the total Alkalinity
80-150 PPM.
Calcium hardness levels should be maintained between
150 and 250 PPM (part per million).
Adjust pH, total Alkalinity and Calcium hardness utilizing
the directions on the chemical bottles provided by your
dealers staii up kit.
It may be necessary to retest and add additional chemicals
to get to the proper levels in Step 3.
Add 2 oz. of concentrated chlorinating granules (sodium
Dichlor-s-triazinetreone) per 500 gallons on initial start up
to begin sanitizing the spa water.
SPECIAL NOTE: If you choose to maintain a chlorine residual, we recommend a level
of 0.5 ppm being maintained.
- 29 -