Connecting A Dvd Player With Component Video Connectors - Sony WEGA KE 42M1 Operating Instructions Manual

Connecting a DVD Player with Component Video
Connectors
AUDIO cable
(not supplied)
Use this hookup if:
• Your DVD player has component (Y, P
Disconnect all power sources before making any connections.
1
Using a component video cable, connect the DVD player's Y, P
jacks to the Y, P and P
B
connections.
Tip
The Y, P and P jacks on your DVD player are sometimes labeled as Y, C
B R
B-Y and R-Y. If so, connect the cables to the matching colors.
2
Using an AUDIO cable, connect the DVD player's AUDIO OUT jacks to
the TV's AUDIO IN jacks.
Note
The Y, P and P jacks do not provide audio, so audio cables must be connected to
B R
provide sound.
Y
P
P
R
AUDIO-L (white)
AUDIO-R (red)
Component video cable
(not supplied)
DVD player
Tips
• To take advantage of the Wide Screen Modes, set the aspect ratio of the output signal to 16:9
on your DVD player. For details, refer to the operating instructions supplied with your DVD
player.
• Some DVD players are equipped with the three component video connectors: Y - Green, P
(C , C or B-Y) - Blue and P
B b R
, P ) jacks.
B R
jacks on the TV. Use the HD/DVD IN 4
R
Rear of TV
VIDEO IN
B
1 3
S VIDEO
VIDEO
L(MONO)
AUDIO
R
(C , C or R-Y) - Red.
R r
and P
B R
and C , or Y,
B R
HD/DVD IN
4
Y Y
P P
B B CENTER SPEAKER
IN
180W (6 ) MAX
P P
R R
AUDIO OUT
L L(MONO)
(VAR/FIX)
AUDIO AUDIO
R
R
B
27