Sony WEGA KE 42M1 Operating Instructions Manual page 32

Digital Satellite Receiver
32
When connecting to the Digital Satellite Receiver's DVI-HDTV
connector
If the Digital Satellite Receiver does not have an HDMI connector, you can
connect the TV's HDMI IN connector to the Digital Satellite Receiver's
DVI-HDTV OUT connector using the HDMI cable (not supplied).
1
Using a HDMI cable (not supplied), connect the Digital Satellite
Receiver's DVI-HDTV OUT connector to the TV's HDMI IN connector.
Use the HDMI IN 5 connection.
Note
The DVI-HDTV VIDEO connector does not provide audio, so audio cables must be
connected to provide sound when an HDMI to DVI-HDTV adapter is used.
2
Using an AUDIO cable, connect the Digital Satellite Receiver's AUDIO
OUT jacks to the TV's AUDIO IN jacks.
AUDIO-R (red)
AUDIO-L (white)
HDMI to DVI-HDTV adapter
or cable (not supplied)
Rear of TV
R L
AUDIO IN
5
AUDIO cable
(not supplied)
VIDEO IN
1 3
S VIDEO
VIDEO
IN
L(MONO)
AUDIO
R