Technical Specifications - Graco Python XL-DA25 Series Instructions And Parts

Technical Specifications

Python XL-DA25 Chemical Injection Pump
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum pneumatic inlet pressure
Maximum fluid working pressure
Maximum cycle rate
Environmental temperature range
Noise (dBa)
6.0 in. Pneumatic Motor Sound Power*
6.0 in. Pneumatic Motor Sound Pressure**
7.5 in. Pneumatic Motor Sound Power*
7.5 in. Pneumatic Motor Sound Pressure**
Inlet/Outlet Sizes
Fluid inlet size (3/4 in. plunger)
Fluid inlet size (1 in. plunger)
Fluid outlet size (3/4 in. and 1 in. plungers)
Pneumatic inlet size
Exhaust fitting size
Materials of Construction
Pump/Check Valve Seal Material
Wetted Parts
Weight
6.0 in. Pneumatic Motor
0.75 in. lowers (CI-0600-075-113-xx-2-x)
1.00 in. lowers (CI-0600-100-138-xx-2-x)
7.5 in. Pneumatic Motor
0.75 in. lowers (CI-0750-075-113-xx-2-x)
1.00 in. lowers (CI-0750-100-138-xx-2-x)
* Sound Power at 70 psi (0.48 MPa, 4.8 bar), 20 cpm. Sound power measured per ISO-9614-2.
** Sound Pressure was test 3.28 feet (1 m) from equipment.
3A6831A
US
See Models on page 3.
See Models on page 3.
-40°– 176°F
3/4 in. npt(m)
See Configuration Number Matrix on page 4 for seal mate-
rial. All other packing materials are PEEK and PTFE unless
otherwise noted.
See Configuration Number Matrix on page 4 for plunger
material. All other packing materials are 316 stainless steel
unless otherwise noted.
57.5 lbs
60.5 lbs
62.5 lbs
65.5 lbs
Technical Specifications
Metric
60 cpm
-40°– 80°C
80.1 dBA
70.2 dBA
78.8 dBA
68.9 dBA
1 in. npt(m)
1/2 in. npt(f)
1/4 in. npt(f)
1/2 in. npt(f)
26.1 kg
27.4 kg
28.3 kg
28.3 kg
41