Sony WEGA KE-42MR1 Operating Instructions Manual page 24

Sony flat panel color tv operating instructions
Hide thumbs Also See for WEGA KE-42MR1:
Table of Contents

Advertisement

4
The Country menu appears automatically on the TV
screen.
Press
or
to select the country in which you
will operate the TV set, then press OK to confirm
your selection.
• If the country in which you want to use the
TVset does not appear in the list, select "off"
instead of a country.
• If you change the country selection, Clock Set
should always be performed next.
5
The Clock Set menu appears on the TV screen.
a)Press
or
b)Press
or
c) Press
or
press OK at the time signal.
The clock starts.
If you adjust the clock, Auto Tuning should
always be performed next.
6
The Auto Tuning menu appears on the screen.
Press OK to select Yes.
7
The TV automatically starts searching and storing all
available broadcast channels for you.
This procedure could take some minutes. Please
be patient and do not press any buttons,
otherwise automatic tuning will not be
completed.
If no channels are found during the auto tuning
process, a new menu appears automatically on
the screen asking you to connect the aerial.
Please connect the aerial (see page 22) and press
OK. The auto tuning process will start again.
After all available channels are captured and
stored, the Programme Sorting menu appears
automatically on the screen enabling you to
change the order in which the channels appear
on the screen.
24
First TIme Operation
to set the hour, then press
to set the minutes, then press
to set the day of a week, then
.
.
OK
OK
OK
OK
(continued)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wega ke-50mr1

Table of Contents