Sony WEGA KE-42MR1 Operating Instructions Manual page 18

Buttons
! ! ! ! ¡ ¡ ¡ ¡ Selecting screen format:
! ! ! ! ™ ™ ™ ™ Selecting channels:
! ! ! ! £ £ £ £ Displaying the menu
system:
! ! ! ! ¢ ¢ ¢ ¢ Adjusting the TV volume:
! ! ! ! ∞ ∞ ∞ ∞ Selecting Sound effect:
! ! ! ! § § § § Selecting Picture mode:
! ! ! ! ¶ ¶ ¶ ¶ Joystick
a) If the Media Selector is
set to TV:
b) If the Media Selector is
set to VCR or DVD:
! ! ! ! • • • • NexTView:
! ! ! ! ª ª ª ª Selecting Teletext:
@ @ @ @ º º º º Media Selector:
@ @ @ @ ¡ ¡ ¡ ¡ Displaying On Screen
information:
@ @ @ @ ™ ™ ™ ™ Selecting TV mode:
@ @ @ @ £ £ £ £ Muting the Sound:
In addition to the TV functions, all coloured buttons as well as green symbols are also used
for Teletext operations. For more details, refer to "Teletext" on page 57.
18
Overview
Description
Press this button repeatedly to change the format of the screen. For
more details, refer to "Screen Control" on page 30.
Press these buttons to select the next or previous channel.
Press this button to display the menu on the TV screen. Press again
to remove the menu display from the TV screen.
Press these buttons to adjust the volume of the TV.
Press this button repeatedly to change the sound effect.
Press this button repeatedly to change the picture mode.
• When MENU is selected, use these buttons to operate the menu
system. For more details, refer to "Introducing and Using the
Menu System" on page 26.
• When MENU is switched off, press OK to show an overview of all
TV channels. Then press
press to watch the selected channel.
Using these buttons, you can control the main functions of your VCR or
DVD.
For more details, refer to "NexTView*" on page 58.
Press this button to switch on Teletext.
With this remote control you can operate not only this TV but also
the main functions of your VCR or DVD.
Switch on the equipment you want to operate and then press this
button repeatedly to select VCR, TV or DVD. A green light will light
up momentarily.
An initial set up is required to synchronise this remote control
to your VCR or DVD. This setup depends on the
manufacturer. For more details, refer to "Remote Control
Configuration for VCR/DVD" on page 66.
Press this button to display all on-screen indications. Press again to
cancel.
Press this button to switch off teletext or video input.
Press this button to mute the TV sound. Press again to restore the
sound.
or to select the channel and then