Overview Of The Remote Control Buttons - Sony WEGA KE-42MR1 Operating Instructions Manual

Overview of the Remote Control Buttons

TV
VIDEO
OK
PROG
MENU
Buttons
6 a) If the Media Selector is 6 6 6
switched to TV:
b) If the Media Selector is
switched to VCR:
7 7 7 a) If the Media Selector is 7
switched to VCR or DVD:
b) If the Media Selector is
switched to TV:
8 Switching off the picture: 8
8 8
9 9 9 Displaying the clock: 9
0 0 0 This button works in Teletext mode and is also used for programming the remote control to operate the VCR 0
and DVD.
Buttons Description
1 1 1 1 To Temporarily
Press this button to temporarily switch off the
Switch Off TV: TV (the
the display unit and the media receiver unit
light up in red). Press again to switch on the
TV from standby mode.
To save energy we recommend switching the
TV off completely when the TV is not in use.
2 2 VCR or DVD on/
2 2
Press this button to switch your VCR or DVD
off: on or off.
3 3 Selecting input 3 3
Press this button repeatedly until the desired
source: input symbol of the source appears on the TV
screen.
4 4 Displaying the
4 4
Press this button to display the Memory Stick
Memory Stick Home ("Memory Stick" picture viewer). For
Home ("Memory more details, refer to "Using the Memory
Stick" picture
Stick Home" on page 52.
viewer):
5 5 Selecting
5 5
Press this button to select channels.
channels: For double-digit programme numbers, enter
the second digit within 2.5 seconds.
Description
Press this button to watch the last channel selected (the last channel
watched for at least 5 seconds).
For Sony's VCR double-digit programme numbers, e.g. 23, press
-/- - first and then the buttons 2 and 3.
Press this button to record programmes.
Press this button to return the picture and sound to the factory
preset levels. This will also return the set to the install condition.
Press this button to switch off the picture. Only the picture is
switched off; the sound remains on. Press again to cancel.
Press this button to display the clock on the TV screen. Press again
to turns the clock display off.
The clock display turns off automatically 5 minutes after it is
turned on.
(power on/standby) indicators on
After a certain period without a signal
and without any button being pressed,
the TV automatically switches into
standby mode (Auto Shutoff, page 43).
GB
(continued)
17
Overview