First Time Operation; Switching On The Tv And Tuning The Tv Automatically - Sony WEGA KE-42MR1 Operating Instructions Manual

Switching On the TV and Tuning the TV
Automatically
The first time you switch on your TV, a sequence of menu screens appear on the TV
enabling you to: 1) choose the language of the menu screen, 2) choose the country in which
you wish to operate the TV, 3) set the clock, 4) search and store all available channels (TV
Broadcast) and 5) change the order in which the channels (TV Broadcast) appear on the
screen.
However, if you need to change any of these settings at a later date, you can do so by
selecting the appropriate option in the
1
Connect the display unit and media receiver unit to
the mains (100 - 240V AC; 50/60Hz for the display
unit, 220 - 240V AC; 50/60Hz for the media receiver
unit).
2
The first time that the TV set is connected, it is
usually turned on. If the TV is off, press the
switch on the media receiver unit to turn on the TV.
The first time you switch on the TV, a Language
menu appears automatically on the TV screen.
3
Press / /
select the language, then press OK to confirm your
selection.
From now on, all menus will appear in the selected
language.
or on the remote control to
(Set Up) menu.
1 2 3 4
Power
PROG
5 6 PC MEMORY STICK
PROG
PROG
1 2 3 4 5 6 PC MEMORY STICK
PROG
OK
(continued)

First TIme Operation

GB
23