B.
Set-Up and Operation
1.
Main Display Screen. Press the Power Switch momentarily. The OLED display will
show the Main Display Screen :
Host MDR
Lens Selection
Shows focus distance
in digital format
(Lens must be calibrated)
2. Menu Screen Options. Press the
3. Select a radio
Channel
Press the right side of the NAV key to highlight the Channel number. Change to the
desired channel by pressing the top and bottom pads of the Nav key. The antenna icon
and bars indicate the presence and signal strength of MDR2 units on that channel.
4. Selecting
Lens
with the Nav key (Fig. 6.1) allows lenses to be calibrated and their data
to be stored in the on-board library. The Focus Mapping software matches the witness
marks of calibrated lenses to the printed scales on the lens rings. The
6.1) is used to match the installed focus ring letter (A – E).
Radio Channel
Focus Ring Letter
Main Display Screen
MENU
soft-key; the MENU screen appears.
to match that of the Motor Driver:
Menu Screen: Channel Selection
Signal Strength bars
Battery Charge
All functions are accessed through
the Menu key
Ring
key (Fig
9