Preston Cinema Systems FI+Z Manual page 10

The Choose key (Fig. 6.1) brings up the list of folders containing lens data (Fig 6.2). The
All lenses
folder contains data on all of the lenses stored in the HU3 lens library. The
Library stores up to 255 lenses.
6.3).
My list A, B
The folders , and
can be accessed quickly without having to scroll through the complete list. Pressing
allows a lens to be copied from the lens library to the
To use a lens from the library, choose a lens folder shown Fig 6.5. Using the Nav key
select the manufacturer (fig. 6.5, the lens type (fig. 6.6), and the lens (fig 6.7) and press
either OK or ENTER. Use the focus knob to set the lens to infinity as shown in Fig 6.8 and
press NEXT/ENTER. The lens name now appears on the main screen (Fig. 6.9).
Fig 6.4
Fig 6.7
To calibrate a new lens:
Name the lens and store it in the lens library.
·
Use the Edit function to calibrate the lens.
·
To name the lens, go to the Lens selection screen (FIG 6.2), select
select a manufacturer's folder (FIG 6.5), and Lens Type (FIG 6.6).
Press the New Lens key (Fig 6.7) and you will be asked to select the focal length (Fig 6.10),
and Serial Number (FIG 6.11). When finished, press
123) appears in the lens type folder (Fig 15). Note that the lenses are automatically sorted
in ascending values of the focal length.
Next brings up the contents of the selected folder (Fig
C
are used to store up to 15 lenses (3 screens) so that they
Fig 6.5
Fig. 6.8
Next
My list
folder (fig 6.4).
Fig 6.6
Fig. 6.9
All lenses (Fig 6.2),
and the lens name (18mm s/n
Add
10