Panatape And Cinetape; Light Ranger - Preston Cinema Systems FI+Z Manual

Lens limits can be used to lock a motor to a given position. This is done by setting a zero-
span, where the beginning and end of the range are the same point. To lock a motor,
position the motor to the desired point and press the set button twice.
11. Panatape and Cine Tape Interfaces.
The Panatape and Cinetape units can be used to provide a distance reading that is
displayed by the HU3 main display screen. The MDR3 serial port accepts data directly from
Panatape/Cinetape units while the MDR2 requires interface units 4534/4542 respectively.
Pressing the Fshow button switches the display from the remote distance measuring
device (Fig. 11.1) to a dual display (Fig 11.2) and finally to the default display (Fig.
11.3).
Fig 11.1 Fig. 11.2 Fig. 11.3
12. Light Ranger 2 (LR2)
The LR2 (Fig. 12.1) provides focus assist information in the form of graphics which overlay
the camera image (Fig. 12.2). In the Manual mode of operation, the overlay graphics
indicate the direction and amount the focus knob must be turned to bring a subject into
sharp focus. In the autofocus mode, the focus will track a subject selected from the 16
measurement zones. The HU3 display (Fig. 12.3) shows the distance selected in the target
area. http://www.prestoncinema.com/products_LR2_2014.html
15