Digital Motor Brackets - Preston Cinema Systems FI+Z Manual

A. Digital Motor Brackets.
The integral bracket ("A" version) provides for simplified mounting and also allows the
motors to be positioned very close to one another. A rosette gear securely locks the swing
arm in position. See pictures on previous page.
Important tip for integral brackets: to prevent the motor position from changing as the
handles are tightened, first tighten the handle which clamps the motor to the rod and then
tighten the rosette handle.
Swing Arm Brackets pictured below have a 19mm opening on one end and a 15mm opening
of the other. Step-down bushings accommodate 15mm and 0.635" rods, p/n 4320 and p/n
4321 respectively.
4310 4334
Short Brackets for Panavision
Vertical Matte Box Rods
Bracket p/n Distance between holes
4310 2.2"
4334 1.6"
4302 1.8"
4301 3.7"
4333 4.4"
4302
4301
Long Brackets for Horizontal
Matte Box Rods
Use
PV top rod bracket
Clamps to PV Long Rod Support bracket
PV bottom rod bracket
Arri, Red, general purpose
Arri, Moviecam, general purpose
4333
21