Preston Cinema Systems FI+Z Manual page 6

To turn off the power to the unit, press the Power Switch for 3 seconds.
c. If MDR3 appears in the upper right corner of the display, the HU3 and MDR3 are
both set to the same wireless channel. If the wireless channels of the HU3 and MDR3
do not match, the message
display.
d. Match the HU3 wireless channel to the MDR3:
Press the Menu
·
the selection to the right. Change the channel number with the Nav key to match
the setting of the MDR3.
The Signal Strength bars will appear. To return to the main menu, press the Nav
·
key left.
e. To use a blank focus marking ring, turn off the Focus mapping:
Press the Menu
§
Select Lens.
§
If the focal length and serial number of a lens appears to the right of "Lens",
§
press Fmap OFF.
The HU3 is now ready for basic operation. The blank focus marking ring,
§
and iris marking strip can be used to manually mark lens calibrations.
f. Focus mapping eliminates the need to manually mark separate rings for each lens.
Data from the lens library is matched to pre-printed focus marking rings. This
makes process of lens changing quick and efficient. A detailed description of this
function showing the display screens is given in section III. To load focus data for a
lens and select a focus ring:
Press the Menu key.
·
Use the Nav key to select Lens.
·
No Host! will appear in the upper left corner of the
Menu Screen: Channel Selection
soft key. "Channel" will be highlighted. Use the Nav key to move
key.
6