Features Menu - Sony KDL-20G30xx Operating Instructions Manual

Features menu

Features
Power Saving
AV2 Output
RGB Centre
Timer
Back: Select:
Power Saving
AV2 Output
RGB Centre
Timer
Standard
TV
0
Exit:
Enter:
MENU
Selects the power saving mode to reduce the power consumption of the TV.
"Standard": Default settings.
"Reduce": Reduces the power consumption of the TV.
"Picture Off": Switches off the picture. You can listen to the sound with the picture
off.
Sets a signal to be output through the socket labelled
TV. If you connect a VCR to the
equipment connected to other sockets of the TV.
"TV": Outputs a broadcast.
"Auto": Outputs whatever is being viewed on the screen. Not available for
AV3.
Adjusts the horizontal picture position so that the picture is in the middle of the
screen.
z
This option is only available if an RGB source has been connected to the Scarts connectors
1/ 1 2/
or
Sets the timer to turn on/off the TV.
Sleep Timer
Sets a period of time after which the TV automatically switches itself into standby
mode.
When the Sleep Timer is activated, the
up in orange.
z
• If you switch off the TV and switch it on again, "Sleep Timer" is reset to "Off".
• "Sleep timer will end soon. Power will be turned off" appears on the screen one minute
before the TV switches to standby mode.
Clock Set
Allows you to adjust the clock manually. When the TV is receiving digital
channels, the clock cannot be adjusted manually since it is set to the time code of
the broadcasted signal.
Timer
Sets the timer to turn on/off the TV.
"Timer Mode": Selects the desired period.
"On Time": Sets the time to turn on the TV.
"Off Time": Sets the time to turn off the TV.
You can select the options listed below on the
Features menu. To select options in "Settings",
see "Navigating through menus" (page 19).
/ 2 socket, you can then record from the
2
on the rear of the TV.
(Timer) indicator on the TV (front) lights
/ 2 on the rear of the
23
GB