The Features Menu - Sony WEGA KLV-20SR3 Operating Instructions Manual

The Features Menu

Picture Adjustment
Picture Mode Personal
Contrast 80
Brightness 50
Colour 50
Sharpness 50
Backlight 70
Reset
Noise Reduction Auto
Colour Tone Normal
Select: Set: End:
OK MENU
m
Features
Power Saving Standard
AV2 Output Auto
TV Speakers On
RGB Center
0
Select: Set: End:
OK MENU
POWER SAVING
This option allows you to reduce the power consumption of this TV.
To do this:
After selecting the option, press OK . Then, press
AV2 OUTPUT
The "AV2 Ouptut" option allows you to select the source to be output from the Scart connector
2/
is being viewed on the TV.
If your VCR or DVD recorder supports SmartLink, this procedure is not necessary.
To do this:
Once you have entered into the "Features" menu as it is explained in the previous page and after
selecting the option, press OK . Then press
TV
AUTO to output the signal that is being viewed on the TV.
• If you select "AUTO", the output signal will always be the same one that is displayed on
• If you have connected a decoder to the Scart
28
TV Functions
Features
Power Saving Standard
AV2 Output Auto
TV Speakers On
RGB Center 0
,
Select: Set:
OK Back:
so that you can record from this Scart the signal coming from the TV or the signal that
S
to output the aerial source.
the screen.
Scart, please remember to change back the "AV2 Output" to "TV" for correct
unscrambling. Alternatively, set the "Decoder" option in the "Manual Programme Preset"
menu to "On" for the scrambled programme. For more details refer to page 33.
The "Features" menu allows you to alter
various settings of the TV.
To do this:
Press the MENU button and press
select , then press OK to enter this menu.
Next, press
and press OK . Finally, read below how to
operate into each option.
End:
MENU
v V
or
to select Reduce. Next, press OK to store.
v V
or to select the desired output signal:
2/
S
v
v V
or to select the desired option
2 or to a VCR connected to this
twice to