Features Menu; Power Saving; Light Sensor; Tv Speakers - Sony KLV-S40A10 Operating Instructions Manual

Features menu

Features

Power Saving

On

Light Sensor

On

TV Speakers

On
PC Adjustment
Select: Enter: Back: End:
Power Saving
Reduces the power consumption of the TV.
1
2
Light Sensor
Automatically optimizes the picture settings according to the ambient light in the room.
1
2
TV Speakers
Turns off the TV speakers e.g. to listen to the sound through external audio equipment
connected to the TV.
1
2
WEGA GATE
Press to select "Power Saving".
Press M/m to select "On" or "Picture Off", then press
Note
The picture will disappear when you move the focus to "Picture Off". Press
Off".
Press to select "Light Sensor".
Press M/m to select "On" then press
Press to select "TV Speakers".
Press M/m to select one of the following, then press
On: the sound is output from the TV speakers.
One Time Off: the TV speakers are temporarily turned off allowing you to listen to the
sound from external audio equipment. The "TV speakers" option automatically returns
to "On" when the TV set is switched off.
Permanent Off: the TV speakers are permanently turned off allowing you to listen to the
sound from external audio equipment.
Tip
To turn on the TV speakers again, change to on.
You can select the options listed below on the
Features menu. To select options, see "Using WEGA
GATE" (page 22).
.
.
to cancel "Picture
.
29
GB