Viewing Pictures From Connected Equipment - Sony KDL-20G30xx Operating Instructions Manual

Viewing pictures from
connected equipment
Switch on the connected equipment, then
perform one of the following operation.
For equipment connected to the scart sockets using a
fully-wired 21-pin scart lead
Start playback on the connected equipment.
The picture from the connected equipment appears on
the screen.
For an auto-tuned VCR (page 7)
In analogue mode, press PROG +/-, or the number
buttons, to select the video channel.
For other connected equipment
Press / to display the connected equipment list.
F f
Press / to select the desired input source, then press
. (The highlighted item is selected if 2 seconds pass
without any operation after pressing
When the input source is set to "Skip" in the "AV
Preset" menu under the "Set-up" menu (page 27), that
input does not appear in the list.
Symbol on the Description
screen
AV1 To see the equipment connected to A.
AV1/
AV2 To see the equipment connected to B.
AV2/
~
SmartLink is a direct link between the
TV and a VCR/DVD recorder.
To see the equipment connected to C.
AV3
To see the equipment connected to D.
AV4 or
AV4
z
To avoid picture noise, do not connect
the camcorder to the video socket
and the S video socket
same time. If you connect mono
equipment, connect to the L socket
18
GB
F f
/ .)
4 at the
4.
To connect Do this
Headphones E Connect to the i socket to listen to
sound from the TV on headphones.
Conditional To use Pay Per View services.
Access Module For details, refer to the instruction
(CAM) F
manual supplied with your CAM. To
use the CAM, remove the rubber cover
from the CAM slot. Switch off the TV
when inserting your CAM into the
CAM slot. When you do not use the
CAM, we recommend that you replace
the cover on the CAM slot.
~
CAM is not supported in all countries.
Please check with your authorized dealer.
Additional operations
To
Return to normal TV
mode
Access the Digital
Favourites (in digital
mode only)
Using the Tools menu
Press TOOLS to display the following options when

viewing pictures from connected equipment.

Options
Close
Picture Mode
Sound Effect
Sleep Timer
Power Saving
4
Do this
Press DIGITAL or ANALOG.
Press .
For details, see page 16.
Description
Closes the Tools menu.
See page 20.
See page 22.
See page 23.
See page 23.