Set-Up Menu - Sony KDL-20G30xx Operating Instructions Manual

Set-up menu

Set-up
Auto Start Up
Language
Auto Tuning
Programme Sorting
AV Preset
Sound Offset
Manual Programme Preset
Digital Set-up
Back: Select:
Auto Start Up
Language
Auto Tuning
Programme Sorting
AV Preset
24
GB
English
Enter: Exit:
MENU
Starts the "first time operation menu" to select the language, country/region and
location, and tune in all available digital and analogue channels. Usually, you do not
need to do this operation because the language and country/region will have been
selected and channels already tuned when the TV was first installed (page 7).
However, this option allows you to repeat the process (e.g., to retune the TV after
moving house, or to search for new channels that have been launched by
broadcasters).
Selects the language in which the menus are displayed.
Tunes in all the available analogue channels.
Usually you do not need to do this operation because the channels are already tuned
when the TV was first installed (page 7). However, this option allows you to repeat
the process (e.g., to retune the TV after moving house, or to search for new channels
that have been launched by broadcasters).
Changes the order in which the analogue channels are stored on the TV.
F f
1 Press / to select the channel you want to move to a new position,
g
then press .
F f
2
Press / to select the new position for your channel, then press
Assigns a name to any equipment connected to the side and rear sockets. The name
will be displayed briefly on the screen when the equipment is selected. You can skip
an input source that is not connected to any equipment.
F f
1
Press / to select the desired input source, then press
F f
2
Press / to select the desired option below, then press
•
AV1 (or AV2/ AV3/ AV4), VIDEO, DVD, CABLE, GAME, CAM, SAT
the preset labels to assign a name to connected equipment.
• "Edit": Creates your own label.
F f
1 Press
/ to select the desired letter or number ("_" for a blank
space), then press
If you input a wrong character
G g
Press / to select the wrong character. Then, press
character.
2 Repeat the procedure in step 1 until the name is completed.
3 Select "OK", then press
• "Skip": Skips an input source that is not connected to any equipment when you
press F/f to select the input source.
You can select the options listed below on the
Set-up menu. To select options in "Settings", see
"Navigating through menus" (page 19).
g
.
.
.
.
.
: Uses one of
F f
/ to select the correct