Features Menu - Sony Bravia KDL-26U2000 Operating Instructions Manual

Treble
Bass
Balance
Reset
Dual Sound
Auto Volume
TV Speakers

Features menu

Features
Screen
Power Saving
AV2 Output
RGB Center
PC Adjustment
Timer
Back: Select:
Screen
Power Saving
Adjusts higher-pitched sounds.
Adjusts lower-pitched sounds.
Emphasizes left or right speaker balance.
Resets all the sound settings to the factory settings.
Selects the sound from the speaker for a stereo or bilingual broadcast.
• "Stereo", "Mono": For a stereo broadcast.
• "A"/"B"/"Mono": For a bilingual broadcast, select "A" for sound channel 1, "B"
for sound channel 2, or "Mono" for a mono channel, if available.
Tip
If you select other equipment connected to the TV, set "Dual Sound" to "Stereo", "A" or "B".
Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend
to be louder than programmes).
Turns off the TV speakers e.g. to listen to the sound through external audio
equipment connected to the TV.
• "On": the sound is output from the TV speakers.
• "One Time Off": the TV speakers are temporarily turned off allowing you to listen
to the sound from external audio equipment.
• "Permanent Off": the TV speakers are permanently turned off allowing you to
listen to the sound from external audio equipment.
Tips
• To turn on the TV speakers again, change to on.
• The "One Time Off" option automatically returns to "On" when the TV set is
switched off.
• "Sound Adjustment" options are not available if "One Time Off" or "Permanent
Off" have been selected.
Standard
TV
0
Exit:
Enter:
MENU
Changes the screen format.
• "Auto Format": Automatically changes the screen format according to the
broadcast signal.
• "Screen Format": For details about the screen format, see page 12
• "Vertical Size": Adjusts the vertical size of the picture when the screen format is
set to Smart.
Tips
• Even if you have selected "On" or "Off" in "Auto Format", you can always modify the
format of the screen by pressing
• "Auto Format" is available for PAL and SECAM signals only.
Selects the power saving mode to reduce the power consumption of the TV.
• "Standard": Default settings.
• "Reduce": Reduces the power consumption of the TV.
• "Picture Off": Switches off the picture. You can listen to the sound with the picture
off.
You can select the options listed below on the
Features menu. To select options in "Settings",
see "Navigating through menus" (page 15).
repeatedly.
17
GB