Set Up Menu; Auto Start Up; Auto Tuning (Analogue Mode Only); Programme Sorting (Analogue Mode Only) - Sony Bravia KDL-W40A12U Operating Instructions Manual

Set Up menu

Set Up

Auto Start Up

Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Digital Set Up
Select: Set: Back:
OK
Auto Start Up
Starts the "first time operation menu" to tune in all available digital and analogue channels.
Usually, you do not need to do this operation because the channels will have been already
tuned when the TV was first installed (page 13). However, this option allows you to repeat
the process (e.g., to retune the TV after moving house, or to search for new channels that
have been launched by broadcasters).
1
2
3

Auto Tuning (Analogue mode only)

Tunes in all the available analogue channels.
Usually you do not need to do this operation because the channels are already tuned when
the TV was first installed (page 13). However, this option allows you to repeat the process
(e.g., to retune the TV after moving house, or to search for new channels that have been
launched by broadcasters).
1
2

Programme Sorting (Analogue mode only)

Changes the order in which the analogue channels are stored on the TV.
1
2
3
Repeat the procedure in steps 2 and 3 to move other channels if required.
End:
MENU
Press OK to select "Auto Start Up".
Press OK to select "Yes".
The auto-tune display appears on the screen.
Follow steps 1 to 3 of "6: Auto-tuning the TV" (page 13).
Press OK to select "Auto Tuning".
Follow step 1 of "6: Auto-tuning the TV" (page 13).
When all available analogue channels have been tuned, the TV returns to normal
operation.
Press OK to select "Programme Sorting".
Press M/m to select the channel you want to move to a new position,
then press OK.
Press M/m to select the new position for your channel, then press OK.
You can select the options listed below on the Set Up
menu. To select options, see "Navigating through
menus" (page 19).
Continued
29