4: Preventing The Tv From Toppling Over; 5: Switching On The Tv - Sony Bravia KDL-W40A12U Operating Instructions Manual

4: Preventing the TV
from toppling over
For additional stability, the anchor attachments on the
back of the TV can be used to secure the TV to a wall.
(Do not remove the anchor attachments.)
1
Run suitable cables through the holes of
both anchor attachments on the back of the
TV.
cable (not supplied)
2
Anchor the cables to a stable surface such
as a wall or pillar.
wall anchor bracket
(not supplied)
12
anchor attachment
(with hole)

5: Switching on the TV

2
1
Connect the TV to your mains socket (220-
240V AC, 50Hz).
2
Press 1 on the TV (right side).
When you switch on the TV for the first time, the
message confirming the TV start auto-tuning
appears on the screen, then go to "6: Auto-tuning
the TV" on page 13.
When the TV is in standby mode (the 1 (standby)
indicator on the TV (front) is red), press TV +/1
on the remote to switch on the TV.
1