Set-Up Menu - Sony Bravia KDL-26P25xx Operating Instructions Manual

Timer

Set-up menu

Set Up
System Information
Auto Start Up
Language
Country
Auto Tuning
Programme Sorting
AV Preset
Sound Offset
Manual Programme Preset
Digital Set Up
Back: Select:
System Information
Auto Start-up
Language
Country
Auto Tuning
Programme Sorting
AV Preset
20
GB
Sets the timer to turn on/off the TV.
• Sleep Timer
Sets a period of time after which the TV automatically switches itself into standby
mode.
When the Sleep Timer is activated, the
lights up in orange.
Tips
• If you switch off the TV and switch it on again, "Sleep Timer" is reset to "Off".
• "Sleep timer will end soon. Power will be turned off" appears on the screen one minute
before the TV switches to standby mode.
• Clock Set
Allows you to adjust the clock manually. When the TV is receiving digital
channels, the clock cannot be adjusted manually since it is set to the time code of
the broadcasted signal.
• Timer
Sets the timer to turn on/off the TV.
"Timer Mode": Selects the desired period.
"On Time": Sets the time to turn on the TV.
"Off Time": Sets the time to turn off the TV.
English
-
Enter: Exit:
MENU
Displays the current software version and the signal level.
Starts the "first time operation menu" to select the language and country/region, and
tune in all available digital and analogue channels.
Selects the language in which the menus are displayed.
Selects the country/region where you operate the TV.
Tip
The country/region in which you want to use the TV does not appear in the list, select
"-" instead of a country/region.
Tunes in all the available analogue channels.
Changes the order in which the analogue channels are stored on the TV.
1
F f
Press / to select the channel you want to move to a new position,
g
then press .
2
F f
Press / to select the new position for your channel, then press
Assigns a name to any equipment connected to the side and rear sockets.
1
F f
Press / to select the desired input source, then press
2
F f
Press / to select the desired option below, then press
• "
AV1 (or AV2/ AV3/ AV4/ PC/ HDMI 1/HDMI 2), VIDEO, DVD, CABLE, GAME,
": Uses one of the preset labels to assign a name to connected
CAM, SAT
equipment.
• "Edit": Creates your own label.
• "Skip": Skips an input source that is not connected to any equipment when you
press F/f to select the input source.
(Timer) indicator on the TV (front)
You can select the options listed below on the
Set-up menu. To select options in "Settings", see
"Navigating through menus" (page 16).
.
.
.