16
OPERATING OF THE INTEGRATED ELECTRONIC TEMPERATURE REGULATOR
During normal operation, the display of the temperature regulator shows the actual cooling
temperature.
Figure 9 shows the front view of the temperature regulator.
Figure 9
Front view of the temperature regulator
16.1
CHANGING THE SET VALUE
For changing the set value, you must press the P-button < 2 s. The set value adjusted at the factory
at 5 °C (41 °F) is shown. With both arrow keys, the set value can be set upwards or downwards.
However, this value should not be adjusted below +1° C (33.8 °F), otherwise you must expect a
freezing up of the heat exchanger. If you set the value above the ambient temperature, the cooler will
not work.
20
CSS-M/W | 1.02.00
www.mc-techgroup.com