AccuBANKER AB5800 User Manual page 6

Setting Up Your Equipment
A) Installation
Select an appropriate workspace that is clean, flat and leveled. The
equipment should never be placed near strong sources of light, heat
sources or air conditioners. Please do not install the equipment where its
weight cannot be supported.
Plug the power cable to the back of the bill counter and into the wall power
outlet. Turn the equipment on.
B) Bill Guider Installation
Proceed to install them as follow:
a- Align the guider with the latch mecha-
nism in the bill counter.
b- Insert the guider into the latch until a
"click" sound is heard. This means the
guider has locked into place.
c- Repeat this process with the other
guider.
d- To remove the guider, push it ......
while pulling it out from the latching
mechanism.
6