Advertisement
Available languages
Available languages
3. Operation
3.3 Thickness Knob Adjustment Procedure (Feeding Gap)
Proceed with this calibration when the bills are not fed smoothly through
the machine or miscounting errors are occurring frequently.
Other reasons that might require to readjust the feeding gap are:
- The counting of new or mint condition bills
- The counting of poor or bad fitness condition bills
Having the correct thickness adjustment knob positioning will ensure a
smooth counting as well as a trouble-free unit's operation.
Trial and error attempts are recommended before you make the final ad-
justment.
a. for new (thinner) notes, adjust toward "-" to reduce the gap
b. for used (thicker) notes, adjust toward "+" to increase the gap
c. small adjustment toward "+" direction works best
d. Polymer bills might require to reduce the gap for ensuring a good
counting result
Reduce thickness gap
rotates knob toward "-"
3.4 Emergency Stop button
The emergency stop button stops the unit operation immediately in case
any incident occurs. The unit requires to be turned OFF and ON again in
order to resume the counting operation.
Be aware do not press the Emergency button by accident during the nor-
mal operation with the unit.
0
+
Increase thickness gap
rotates knob toward "+"
16
Advertisement
