Advertisement
Available languages
Available languages
2. Machine Overview
2.3 Functions Detection Sensitivity Adjustment (MG-UV-DD-LEVEL)
The user has the option to adjust (increase or decrease) the sensitivity of
the detection functions based on their specific needs. The sensitivity can
be adjusted from 1-9 where 1 is the lowest sensitivity and 9 the highest
sensitivity to adjust.
For modifying the setting values, just keep pressed down the desired secu-
rity function for 3 seconds until the display shows the current sensitivity
value this function has. Then use the numeric keypad for selecting the new
value to set up, then press START to validate the selection and return to
the counting mode.
NOTE: In case the unit is reporting very often error messages related with
any security feature (MG - UV - DD), you might consider to verify the
current Sensitivity setting for these functions, in case they are too high for
the current notes that are being counted.
1
2
4
5
7
8
2.4 Display Brightness adjustment
The user might need to adjust (increase or decrease) the screen brightness
in order to make easier to read the screen.
- Press key # "7" (for 3 seconds) to enter into the BRIGHTNESS menu,
then press sequentially the "CURR" to increase or "DEN" to reduce the
display brightness until reaching the desired value.
- Press START to validate the selection and return to count mode
SENSITIVITY
3
6
UV
9
14
START
4
.
Advertisement
