Electrical Installation - Meiko WS 125 Operating Instructions Manual

Operating instructions for trolley washing machine model WS 125
Maintenance work
7. Installation
Temperature and consumption
Measure the temperature of the tank water and the fresh water rinsing
water and compare with the values in the documentation.
Heating system
Check the complete system for leaks
Clean dirt trap
Check function of the valves
Fresh water system
Check the complete system for leaks
Clean dirt trap
Check function of the valves
Clean the level control
Check the function of the level control
Check water supply quality – water hardness (according to the installation
plan)
Check the machine and all components for lime deposits. Descale if
necessary
Check water supply quality – conductivity x5 for demineralised water or
reverse osmosis water
Check water supply quality – temperatures (according to the installation
plan)
8. Waste water installation
Check the drain cocks for leaks

9. Electrical installation

Check power consumption of all heating elements(I
Tighten all connections
Check all switches for function and damages (see electrical wiring
diagram)
Carry out a visual check on all electrical equipment (e.g. switches / cables /
housings / covers).
Check the switch cabinet ventilator entry and discharge filters
10. Detergent dosing
Check the function (if possible, coordinate with chemicals supplier)
9648649
Cleaning /
Maintenance
see wiring diagram)
N
Design and construction subject to change without prior notice!
Page of
34 38
Service step
 
at least once at least once
every quarter
months but
work
Daily every 1000
 

 
at least once
every six every year but
every 2000
hrs
hrs
 

 
 

 
 
 
 
 
 
 
 





 
 