Working On The Electrical Equipment; Assembly Instructions (For A Partially Completed Machine) - Meiko WS 125 Operating Instructions Manual

Operating instructions for trolley washing machine model WS 125
CAUTION!
CAUTION!
9648649
WE DO NOT ACCEPT NO LIABILITY FOR DAMAGE
OR INJURY ARISING FROM FAILURE TO
OBSERVE AND ABIDE BY THESE SAFETY
INSTRUCTIONS!!!!

5.3. Working on the electrical equipment

Any repair work and troubleshooting on the system's electrical equipment must be carried
out by a qualified electrician!
Check the electrical equipment regularly! Tighten any loose connections! Replace any
damaged leads/cables immediately!
Always keep the switch cabinet closed! Access is only allowed to authorized persons with
key/tools!
6 Assembly instructions (for a partially completed
machine)
These apply where the MEIKO product is a partially completed machine in the sense of
the Machinery Directive (Directive 2006/42/EC).
Observe the following items when connecting MEIKO products to an existing installation:
- The components must be aligned with one another, connected in an appropriate
manner, and fastened so that safe operation is assured. (Choose conditions and
fasteners on site in line with this).
- Dangers (e.g. drawing in, crushing, shearing or cutting) that potentially arise due to
the connection must be prevented appropriately.
- The electrical connection to the supply grid on site, and any necessary electrical
connections must be implemented in line with the enclosed wiring diagram.
- During installation, make sure that you avoid damage, in particular to the electrical
installation.
- After completing the works, check the system for damage.
- Safety and functional tests must be performed in the scope of testing the complete
system at the latest.
- The system is supplied with slide rails to optimise the transition point where
applicable.
Design and construction subject to change without prior notice!
Page of
14 38