Download Print this page

Troubleshooting - Cobra IG32ESI User Manual

Inverter generator, 4-stroke engine

Advertisement

10.TROUBLESHOOTING

When the engine can not be started:
Is there fuel in the tank?
NO
YES
Is the fuel switch on?
NO
YES
Is the engine switch in" RUN/REMOTE" ?
NO
YES
Is stand-by starting mode exceed 15min?
NO
YES
Is there enough oil in the engine?
NO
YES
Is the spark plug in good condition?
NO
YES
If the engine still does not
start, contact with an
authorized Cobra dealer
Appliance does not operate:
Is the output indicator
light ON?
Refill the fuel tank
YES
Check the electrical
Turn the fuel switch on
appliance for any fault.
YES
Turn the engine switch to
Stop engine and then replace or repair the appliance
"RUN/REMOTE"
Restart the engine
Reset the engine switch(Turn to
STOP , then to RUN/REMOTE)
DC receptacle without any electricity:
Add the recommended oil
Check the electrical appliance
for any fault
Clean, readjust gap
and dry the spark plug.
Replace it if necessary
Is the DC circuit
protector OFF?
NO
Is the overload indicator
Contact with an
light ON?
authorized Cobra
NO
dealer
YES
Contact with an
authorized Cobra
NO
dealer
Change or replace the appliance
YES
NO
YES
Push the DC circuit
protector ON.
NO
Contact with an
authorized Cobra dealer
<<29>>

Advertisement

loading