Table of Contents
Advertisement
Setting the Setpoint Temperature
Step 1: Press the
or
Step 2: Press the
or
Note: Holding down either the
temperature display.
The new temperature setting is automatically saved. After 5 seconds, the display
returns to showing the current room temperature.
Setting a New Temperature Differential
IMPORTANT: The default temperature differential is factory set at 1°F. When your room temperature
varies by 1°F, the thermostat turns your system on. If you notice your system turning on and
off too frequently, increase the temperature differential accordingly.
Step 1: Remove the cover and the batteries.
Step 2: Reinstall the batteries and the cover. The display will show
This is the temperature differential setting.
Step 3: Press the
or
The display will return to the room temperature
display five seconds after the last input. The new
temperature differential setting will be saved.
Operation
button; the current temperature setpoint displays.
button until the desired temperature setpoint displays.
or
button to adjust the temperature differential down or up.
button will scroll the
Differential Setting
1
2
3
°F
°C
1°F
0.5°C
2°F
1.0°C
3°F
1.5°C
Advertisement
Table of Contents
