Operation - ICM Controls SC 2201 Installation, Operation & Application Manual

Setting the Room Temperature (Setpoint Temperature)
Step 1: Press the or button; the current temperature setpoint displays.
Step 2: Press the or button until the desired temperature setpoint displays.
Note: Holding down either the or button will scroll the
temperature display.
The new temperature setting is automatically saved. After 5 seconds, the display returns to
showing the current room temperature.
Setting a New Temperature Differential
IMPORTANT: The default temperature differential is factory set at 1°F. When your room temperature varies by 1°F, the
thermostat turns your system on. If you notice your system turning on and off too frequently, increase
the temperature differential accordingly.
Step 1: Remove cover and press Reset button once.
Step 2: The display will show
This is the temperature differential setting.
Step 3: Press the or button to adjust the temperature differential down or up.
The display will return to the room temperature display five seconds
after the last input. The new temperature differential setting will be
saved.

Operation

Differential Setting
1
2
3
°F °C
1°F 0.5°C
2°F 1.0°C
3°F 1.5°C
9