Operation; Setting The Setpoint Temperature; Setting The Temperature Differential - ICM Controls SC 3000 Installation, Operation & Application Manual

The SimpleComfort ® 3000 thermostat has buttons that are used to:
• Adjust the setpoints of the thermostat
• Set the modes
• Program the schedule
• Reset the thermostat
1. With the Mode switch in Heat or Cool, the current temperature setpoint displays.
2. Press the or button until the desired temperature setpoint displays.
3. The new temperature setpoint is automatically saved in memory.

Setting the Temperature Differential

1. The default temperature differential is 1°. When your room temperature varies by 1°F, the thermostat
turns on your system. If you notice your system turning on and off too frequently, increase the
temperature differential.
2. Place the Cool/Off/Heat switch in OFF position.
3. Remove cover and press both and buttons.
4. Press the or button to select desired settings.
5. When finished, move the Cool/Off/Heat switch to Heat or Cool position to lock the setting into memory.


Setting the Setpoint Temperature

Operation