Cisco SPA 303 Package Contents Manual page 3

Setting up Cisco SPA 303 3
* Ensure that the phone is powered-up and connected to the Internet.
1. Verify the device's IP address.
Press [Setup] button à Scroll to [Network] and press [Select] à The IP Address is displayed
under [Current IP].
2. Open Settings Page on Web Browser.
Cisco SPA 303 3 and PC's network connection should be the same. Type the IP address on the
Web browser field on a local PC. [Format:
(192.168.001.002) à Type (http://192.168.1.2)]
* If you have trouble accessing the configuration utility, perform the following steps:
I. Press [Setup] button on the phone.
II. Select [Network].
III. Scroll to [Enable Web Server] and make sure that it is set to [Yes]. If not, press
the [Edit] soft key and press [y/n] soft key to set it to [Yes].
IV. Press [OK], then press [Save].
3. Settings Page will automatically be displayed. Click [Admin Login] à Click [Advanced] à
Click [System] tab.
4. Click [Regional] tab.
http://IPAddress à Example: Phone IP Address
Primary NTP Server and
Secondary NTP Server:
Enter
[ntp.jst.mfeed.ad.jp].
Time Zone: Select your
time zone (e.g. GMT
+09:00].
3