Cisco Nexus 9200 Series Manual page 24

Configuring PTP for Media
Step 4
Step 5
Step 6
Step 7
Cisco Nexus 9000 Series NX-OS IP Fabric for Media Solution Guide, Release 7.0(3)I4(2)
16
Command or Action
interface ethernet slot/port
Example:
switch(config)# interface ethernet
2/1
switch(config-if)#
[no] ptp
Example:
switch(config-if)# ptp
[no] ptp announce interval [aes67 |
smpte-2059] log-seconds
Example:
switch(config-if)# ptp announce
interval aes67 3
[no] ptp announce timeout [aes67 |
smpte-2059] count
Example:
switch(config-if)# ptp announce
timeout aes67 2
Configuring IP Fabric for Media
Purpose
Specifies the interface on which you are enabling PTP
and enters the interface configuration mode.
Enables or disables PTP on an interface.
(Optional)
Configures the interval between PTP announce
messages on an interface.
Table 4: PTP Announcement Interval Range and Default
Values
Option Range
aes67 0 to 4 log
seconds
smpte-2059 –3 to 1 log
seconds
Without the 0 to 4 log
aes67 or seconds
smpte-2059
option
(Optional)
Configures the number of PTP intervals before a timeout
occurs on an interface.
Table 5: PTP Announcement Timeout Range and Default
Values
Option Range
aes67 2 to 10 intervals
2 to 10 intervals
smpte-2059
Without the 2 to 4 intervals
aes67 or
smpte-2059
option
Default Value
1 log second
1 log second
1 log second
Default Value
3 intervals
3 intervals
3 intervals