Subscribe to Our Youtube Channel
Related Manuals for Wilson Electronics 4G Low-Profile Dome Antenna
Summary of Contents for Wilson Electronics 4G Low-Profile Dome Antenna
- Page 1 4G Low-Profile Dome Antenna Ultrathin Radome Antenna User Manual support.weboost.com 866.294.1660 NEED HELP?
- Page 2 ______ Index Package Contents Assembly Diagram: With Ceiling Mount Assembly Diagram: Without Ceiling Mount Installation: Ceiling Mount Installation: Without Ceiling Mount Specifications Warranty Back...
-
Page 3: Package Contents
________ Package Contents Low-Profile Reflector Collar Ceiling Mount Dome Antenna & Tab Ring for hard ceiling mounting 4G LOW-PROFILE DOME ANTENNA... -
Page 4: Assembly Diagram: With Ceiling Mount
Ceiling Mount to booster n-female connector ceiling mount drill or cut 3. in. / 76.2 mm dia. hole with two .50 inch diameter tab cutouts 180°opposed drywall / plaster board Plastic Nut Tab Ring Low-Profile Dome Antenna 4G LOW-PROFILE DOME ANTENNA... - Page 5 ______ Assembly Diagram: With Reflector to booster n-female connector reflector plastic nut plastic collar drywall / plaster board drill or cut 2.5 in. / 64 mm dia. hole low-profile dome antenna 4G LOW-PROFILE DOME ANTENNA...
-
Page 6: Installation: Ceiling Mount
Swing the two clamps on the ceiling collar toward the inside. NOTE: The clamps are limited in how far they can swing in one direction due to the side wall of the sleeve. Swing other direction. 4G LOW-PROFILE DOME ANTENNA... - Page 7 Mount tab ring onto antenna and tighten nut firmly. NOTE: The Collar is not used with Ceiling Mount. NOTE: The text “THIS SIDE UP” on the tab ring for the assembly direction. tab ring 4G LOW-PROFILE DOME ANTENNA...
- Page 8 Twist antenna clockwise 1/8th of a turn to lock in place. Antenna is now fixed in place. NOTE: Antenna can be removed tabs from ceiling mount without damage. Simply rotate back 1/8 turn. from antenna from booster 4G LOW-PROFILE DOME ANTENNA...
-
Page 9: Installation: Without Ceiling Mount
Slide the collar and nut onto the cable. Turn the nut, tightening the antenna against the ceiling. NOTE: Fiberboard ceiling tile is soft; tighten the nut just enough to hold the antenna firmly in place. 4G LOW-PROFILE DOME ANTENNA... - Page 10 ______ (Installation: Without Ceiling Mount cont.) slots Thread the reflector onto the antenna stem. tabs Connect antenna cable to from antenna booster cable. from booster 4G LOW-PROFILE DOME ANTENNA...
-
Page 11: Specifications
Diameter 0.16 in. Low Loss, Diameter 0.16 in. Low Loss, Cable Type Cable Type Plenum Rated Plenum Rated 10 in. / 254mm 10 in. / 254mm Cable Length Cable Length Connector Type N-Female Connector Type N-Female support.weboost.com 866.294.1660 NEED HELP? 4G LOW-PROFILE DOME ANTENNA... -
Page 12: Year Warranty
DISCLAIMER: The information provided by Wilson Electronics is believed to be complete and accurate. However, no responsibility is assumed by Wilson Electronics for any business or personal losses arising from its use, or for any infringements of patents or other rights of third parties that may result from its use.
Need help?
Do you have a question about the 4G Low-Profile Dome Antenna and is the answer not in the manual?
Questions and answers