Mounting the Antenna Pole mount included. Pole mounting is preferred because it will be easier to adjust to the direction of the cell tower . Use the U-Bolts to attach the Antenna to a pole or exhaust pipe . Note: After mounting the antenna, fix any lose cable to the pole to avoid strain on the cable .
Point the Antenna Toward Desired Cell Phone Tower To determine tower location use signal meter . This is important to the installation process because it will determine the overall performance of the booster system . Cell Tower...
Safety Guidelines & Specifications RF Safety Warning: Any antenna used with this device must be located at least 8 inches from all persons . AWS Warning: The Outside Antenna must be installed no higher than 32 feet 9 inches (10 meters) above ground . Electrical Specifications Frequency Band (MHz) 698-806...
Returned Material Authorization (RMA) number supplied by Wilson Electronics . Wilson Electronics shall, at its option, either repair or replace the product . Wilson Electronics will pay for delivery of the repaired or replaced product back to the original consumer if located within the continental U .S .
Need help?
Do you have a question about the WILSON PRO 311228 and is the answer not in the manual?
Questions and answers