Report Settings - Canon FAX-B140 User Manual

REPORT SETTINGS

Name
TX REPORT
RX REPORT
ACTIVITY REPORT
AUTO PRINT
TX/RX SEPARATE
TX SETTINGS
Name
ECM TX
MID PAUSE SET
AUTO REDIAL
REDIAL TIMES
REDIAL INTERVAL
Description
Enable/disable automatic printing of the transmission report.
OUTPUT NO: Turn off the activity report feature.
OUTPUT YES: Set the fax to print an activity report every
time you send a document.
PRINT ERROR ONLY: Print only when an error occurs during
sending.
Enable/disable automatic printing of the reception report.
OUTPUT NO: Turn off the activity report feature.
OUTPUT YES: Set the fax to print an activity report every
time you receive a document.
PRINT ERROR ONLY: Print only when an error occurs during
receiving.
Enable/disable automatic printing of the activity report.
When you set ON, your fax is set to print an activity report
for every 20 transactions (sending and receiving).
Divide the activity management report into sending and
receiving transactions.
Description
Enable/disable error correction during transmission.
Set the length of the pause you insert into a dialling
sequence.
Determine whether the fax will redial a number if it fails to
get a response on the first attempt.
Set the number of retries.
Set the period of time between redialling attempts.
Settings
OUTPUT NO/
OUTPUT YES/
PRINT ERROR ONLY
OUTPUT NO/
OUTPUT YES/
PRINT ERROR ONLY/
–
OUTPUT NO/
OUTPUT YES
ON/OFF
Settings
ON/OFF
4 seconds (1 to 15)
ON/OFF
2 times (1 to 10)
2 minutes (2 to 99)
8-3
8