Table of Contents
Advertisement
6
Setting TAM MONITOR ________________________
TAM MONITOR allows you to screen all incoming calls.
n
To use this feature, LINE MONITOR VOL (see p. 8-2) must be set to a setting other than 0. If LINE
MONITOR VOL is set to 0, you will not be able to hear any incoming messages as they are being
recorded.
1
Press [Function].
Press [Start/Copy].
USER SETTINGS
2
Use [3] or [4] to select TAM SETTINGS.
Press [Start/Copy].
MESSAGE LENGTH
3
Use [3] or [4] to select TAM MONITOR.
Press [Start/Copy].
4
Use [3] or [4] to select ON.
Press [Start/Copy].
5
Press [Stop].
Setting ends and the fax returns to standby mode.
7-4
OFF
Advertisement
Table of Contents
