Care Of The Guardian 2030; Disconnecting The Head Unit; Taking A Test - Guardian Interlock Systems 2030 User Manual

3.3 Care of the GUARDIAN 2030

The GUARDIAN 2030 equipment is designed to operate in extremes of
temperature, and in the typical environment in a motor vehicle. It has
been designed to withstand dust and vibration. The equipment is leased
to you under the Terms and Conditions supplied later in this handbook,
and for which you have signed during installation.
Like any electronic equipment, it will not stand abuse, and will cause
early recalls if damaged. The cost of repairing damaged equipment will
be recovered from participants.
The equipment can be cleaned with a damp cloth, and you should keep
your mouthpieces free from condensation or any obstructions.

3.4 Disconnecting the Head Unit

The head unit can be disconnected from the curly cord by depressing the
white plastic plug release. The head unit can then be stored securely in
a glovebox or in your home to discourage thieves breaking into your
vehicle.
WARNINGS: Do not pull on the head unit cord. The head unit
should never be removed while the motor is running.

4.Taking a Test

Switch the ignition to "ON" to
wake up the device which will
display "INITIALIZING" and the
LED will be green then red.
The device will then prompt you
when ready to accept a breath
sample by displaying "BLOW"
and the LED light will change to
solid red/green.
© GIS Australasia Pty Limited
Responsibility: Customer Support
QMS- 2030 User Manual Development
GIS 440 Guardian 2030 User Instructions
Initial Release: 18 April 2019
Only electronic copy on server is controlled
INITIALIZING
BLOW
Current Release: 18 April 2019
Version 1.0
Page 7 of 40