Stall protect countdown timer after engine has
been switched off. Engine can be started within
RESTART mm:ss
the specified time
After an initial PASS breath sample is received
the device will show the countdown to start the
START mm:ss
vehicle.
If a breath test is not taken but the vehicle is
started (hotwired or jump started) the display will
indicate START VIOLATION. The display will
START VIOL
then indicate BLOW, requiring a breath sample.
This may be recorded as a Program Violation
may initiate a Violation Recall.
If the interlock is not serviced by the SvcLock
date, the device will display a Service Lock
SvcLock ##day
message. If not serviced prior to the end of the
grace period it will enter a Lockout condition.
If the interlock is not serviced by the SvcLock
date, the device will display a Service Lock
SvcLockxxhr
messages. If not serviced prior to the end of the
grace period it will enter a Lockout condition.
Engine can be started within the specified time.
Start vehicle before the device countdown
expires. Operate vehicle normally. Take the
retest breath tests as required.
Take the breath test as requested and contact
the Service Centre to arrange an appointment
before the recall date displayed. You will need
to notify the installer of the reason for the Start
Violation at the next service.
Call the Service Centre to arrange for an
appointment before the countdown expires
and the interlock enters Lockout.
Call the Service Centre to arrange for an
appointment before the countdown expires
and the interlock enters Lockout.
24
Need help?
Do you have a question about the 2030 and is the answer not in the manual?
Questions and answers